July 28, 2002
WooHoo!  I got a digital camera <at last!>
July 9th James Eden and Jon Murchison visited, read Jon's article here.

So whats new since the last shots?

• Not a lot ;-)
• Got the hole-in-the-wall filled in with ply, which still needs to be sanded, primed and painted.
• Front screen plexi is complete
• Panel has been repositioned *again*!
• Temporary installation of left console to set position of throttle (still need to cut the side cockpit wall to fit the final panel)
• Red floods set up.

	New Glareshield. This is only the cardboard template.  The real one will be made from aluminium or stainless steel sheet and fitted with brackets to fasten it to the panel.		Now the screen is flat.. still needs an iron though.
	Looking down into the cockpit with the throttle and left console in place.  1st Display unit is sitting in place.		The hole is finally filled! Ply still needs a sand, and the whole pit needs paint and graphics. Note...now I <finally> got somewhere to stick my charts ;-)
	Temporary left console, throttle and red flood.  The TM throttle will be replaced with a modified Suncom throttle eventually.