| An unusual feature of this motor is the bell, which is made of aluminium only. There is no iron ring to complete the magnetic path. Despite this, it still manages to achieve good power output and better efficiency than some other outrunners of similar size and cost. Apparently, back-iron is not required when the magnets are curved and have 100% coverage. |
|
|
| Prop | Volts | Amps | rpm | Watts | Efficiency |
| - | 7.0 | 0.6 | 7330 | 3.8 | 0% |
| APC SF7x4 | 7.0 | 3.0 | 6765 | 21 | 74% |
| GWS EP8040 | 7.0 | 3.5 | 6652 | 24 | 75% |
| GWS HD8060 | 7.0 | 5.4 | 6215 | 37 | 76% |
| GWS EP9050 | 7.0 | 5.9 | 6103 | 41 | 75% |
| GWS EP1060 | 7.0 | 8.0 | 5630 | 56 | 72% |
| GWS HD9075 | 7.0 | 9.0 | 5392 | 62 | 70% |
| APC SF10x4.7 | 7.0 | 9.4 | 5291 | 65 | 69% |
| APC E10x7 | 7.0 | 9.8 | 5194 | 68 | 68% |
| GWS EP1170 | 7.0 | 10.7 | 5008 | 74 | 65% |
| GWS HD1080 | 7.0 | 11.4 | 4879 | 79 | 65% |
| Prop | Volts | Amps | rpm | Watts | Efficiency |
| - | 10.0 | 0.7 | 10450 | 6.8 | 0% |
| APC SF7x4 | 10.0 | 5.4 | 9263 | 54 | 78% |
| GWS EP8040 | 10.0 | 6.1 | 9093 | 61 | 77% |
| APC E7x5 | 10.0 | 6.2 | 9065 | 62 | 78% |
| GWS HD8060 | 10.0 | 9.5 | 8278 | 94 | 74% |
| GWS EP9050 | 10.0 | 10.0 | 8154 | 99 | 73% |
| APC E8x6 | 10.0 | 10.4 | 8034 | 103 | 73% |
| APC E9x4.5 | 10.0 | 10.5 | 8020 | 104 | 72% |
| GWS EP1060 | 10.0 | 13.1 | 7285 | 130 | 67% |
| GWS HD9075 | 10.0 | 14.6 | 6923 | 144 | 64% |
