Hi-lux
pump, brass manifold with pressure control switch. Pvc pipe (use rubber
around hot areas), flexi-hose and tyre pressure connector. Bottom
of picture is the auto-filter (left) 3-way valve (middle) for pressure
relief and one way valve. (control wire encircles) Quick connects
and various air hose fittings, clips on plastic bag. 10mm air-hose throughout.
New
bracket installed onto existing air con pump
A
pumping mess. The lubricant oil recirculates when the auto-filter
flushes the oil from it's bowl. The oil runs up hill to the pump
via a T connector. Air is vented between the pump and 3-way valve
when the air con pump is turned off. This is to allow the pump to
spin on start with no pressure in the line. Regulator runs at 90
PSI.
$20
tank which is removed when not required.
This is required if you want a quick air-up or to use air tools.
With the tank online a 31" tyre can be aired up from flat in about 1 minute.